UF Geomatics - People

Access FDOT/AASHTO Design Standards: http://www.myflorida.com/, pick Government, Executive Branch, FDOT, OFFICES(left list), Roadway Design, STANDARDS (bottom of page), latest Standards Booklet S, 500 Series, 510.pdf. Or go directly: http://www.dot.state.fl.us/rddesign/DesignStandards/Standards.shtm

Assignment: see HW6 on eLearning Vista.

Solution Video: see on eLearning Vista

Module 7: Quantities and Earthwork Analysis

Lecture 21: Intro to Quantities, Earthwork

Lecture 22: Mass Diagram Construction

Lecture 23: Mass Diagram Analysis (*wmv)

NOTE: For Lecture 23, FIRST, printout these two jpgs. Mass Diagram 1, Mass Diagram 2

Do the graphical construction on paper as I do on the videos – you'll learn much more!!!

Assignment: see HW7 on eLearning Vista.

Solution Video: see on eLearning Vista

Midterm Quiz 2: (on Modules 5, 6, and 7)

Presolution Quiz 2: you may use anything on paper that you did yourself: lecture notes, printouts of

your Excel HW spreadsheets, hand written formula sheets, notes from

references, HW assignment printouts. ALSO bring:

(1)printout of the Spiral Formula sheet, printout of the

(2)FDOT/AASHTO superelevation design standard *.510

Review Document

Module 8: AASHTO Geometric Design Standards

Lecture 24: Geometric Design Standards

Lecture 25: Sight Distance Design

Lecture 26: Safe Road Evaluation

Assignment: see HW8 on eLearning Vista, our last HW!!

Sources for AASHTO's "Green Book" – HW8 requires reference to the Green Book. AASHTO sells the

Book and it is not on line. Here's how to get access:

(1) I've placed a copy in 304 Reed Lab on reserve in the bookshelf just to the left inside the door.

You may use the manual in 304 Reed and make copies of a few pages. or

(2) Find the FDOT's "Florida Green Book FGB" on line in the Roadway Design office:

http://www.dot.state.fl.us/rddesign/CS/CS.shtm

This is condensed from AASHTO's book for use in Florida.

Module 9: A Route Project Time Line and Plan Set

Lecture 27: A Route Project Time Line

Lecture 28: Review of Plans 1 (view with Windows Media Player)

Lecture 29: Review of Plans 2 (view with Windows Media Player)

(you may view these lectures alongside the plan set scan below)

Review of Plans 2 Excel (pull this up and printout to help track the video)

Lecture 30: Right of Way Acquisition (not assigned)

Lecture 31: Construction Layout Surveys (not assigned)

Plan Set: Bearss Ave Route Plans

Final Exam (covering Modules 1 thru 9 (Lectures 1-29))

Presolution for Final: You must bring printouts of the Bearss Ave plans (found above online)

And you may use anything you've done yourself on paper: your hand written lecture notes, HW printouts, pre-solution calculations and notes on Bearss Ave. Also bring FDOT Chart 510 for superelevation values.

Review for Final

Extra Course Material – This is good material, but you're responsible only if assigned.

Module: Geopak/Microstation

"Labs" on www.geomatics.ifas.ufl.edu Course Materials, SUR 4201L

Lecture 32: Tutorial Labs 2 and 3 Intro to Microstation:

Lecture 33: Tutorial Labs 4 and 5 Convert Graphics, Surface Modeling by TIN

Lecture 34: Tutorial Labs 6 and 8 Ground Profile, Vertical Design, Superelevation Shapes

Lecture 35: Tutorial Labs 9 and 10 Cross Sections, Slope Limits, Earthwork

GEOPAK/ MICROSTATION files: Knucklehead's Guide to Geopak: http://www.wfl.fhwa.dot.gov/design/cadd/idiot2004/idiot2004.htm

SUR4201 seed file for setting up new dgn sur4201seed.dgn

Loxahatchee map to attach as reference file: lox.dgn

Raw TIN text file: tin.txt

Input Files

criteria file: for creating cross sections criteria

earth input: for calculating earthwork earth

Last updated: 05/12/05- Comments and suggestions welcome - webmaster